Orange Pi Lite USB Microscope and Checking The Fake SD Card

Lets see if the Orange Pi has enough power to run a USB Microscope!

source

The Orange Pi Zero Single Board computer ships for $6.99

The developer board comes with a quad-core ARM central processor and also Wi-Fi.

orange-pi-zero-parts
Board Components
orange-pi-zero-specs
Orange Pi Zero Specs

From $6.99, a new Raspberry Pi competitor named Orange Pi Zero entails lower cost than certain snacks in New York.

The Orange Pi Zero allows you to make gadgets or robots, or it can also turn into a file / media server. Such developer boards are also utilized to develop and examine industrial products.

The desktop computer is a competitor to the minuscule Raspberry Pi Zero, a stripped down alternative of Raspberry Pi that will set you back $5. But Orange Pi Zero has higher quality hardware with a faster central processor and Wi-Fi abilities.

You should never expect the tiny Orange Pi Zero to give awesome performance or be a full-fledged PC alternative. In the event you’re attempting to get a robust board desktop computer, think about the $35 Raspberry Pi 3 or $15 Pine64 board.

The Orange Pi Zero has a quad-core Allwinner ARM Cortex-A7 central processor, which nowadays has been utilized to power low-end and additionally mid-range tablets and cell phones.

Further, it works with ARM’s Mali 400 MP2 graphics unit, which is ideal for coping with high-definition videos. Shenzhen Xunlong, the maker of the board, claims it is able to handle H.265 4K movie, but the board isn’t designed for that. The Orange Pi Zero also does not have a display out port.

The Zero provides an SD card slot and 256MB of on-board RAM. Yet another model with 512MB of memory will set you back $8.99.

Besides, the Zero provides 802.11 b/g/n Wi-Fi and also ethernet networking capabilities. Further, it has expansion slots and pins to put in other boards and a USB 2.0 host port.

If you are looking to employ the board to know developer work or test programs, software might be a problem. It holds up Android OS, but only version 4.4. It also can support Debian and also Ubuntu.

The board can be found on Alibaba’s retail site for $10.30, covering shipping and handling.

Tech buffs are looking at a couple of affordable boards with x86 and ARM CPUs. The prices of CPUs, RAM, and parts are reducing, triggering very affordable board alternatives. Allwinner’s SoCs, particularly, are amongst the most competitive readily available.

Based on:
http://www.pcworld.com/article/3138886/computers/the-orange-pi-zero-single-board-computer-ships-for-699.html

Learn More

Orange Pi NAS -Orange Pi Zero Micro PC Add-on Board Is Presented At $7

Orange Pi NAS, Orange Pi Zero Mini PC Expansion Board Launches For $7

Orange Pi NAS Specs

Orange Pi Zero, todo lo que pudo haber sido el Raspberry Pi Zero y no fue
https://redeszone.net/2017/02/23/orange-pi-zero-lo-pudo-haber-raspberry-pi-zero-no-fue/

ORANGE PI LAUNCHES TWO BOARDS
Orange Pi Releases Two Boards

CircuitMedic Circuit Bond Kit for electronics and pcb repairs

The CRC115-1322 Epoxy Kit is ideal for the repair of printed circuit board damage. This kit contains 10 packages of clear, low viscosity, superior strength epoxy, precisely measured out into twinpack plastic packages so it is easy to use and there is no measuring.

source

How to Find PCB Repair Service Provider

pcb-service-provider

Printed circuit boards or PCBs have been popular for decades. With their pads and conductive traces, they support many different electronic elements. As we speak, they turned out to be a favorite alternative for each and every electronic equipment producer. In case your PCB board gets destroyed, you are able to seek aid of a premium PCB repair service supplier where you live. This article guides you through suggestions for determine highly regarded services inside your town.

The Vital Considerations When Picking PCB Repair Services

If you are hunting for a highly regarded PCB repair service agency near you, there are several points to be taken into account.

Look at Name:

Google brings results of PCB repair services in a specific region. This enables you to see the place they are situated and the types of services delivered by them. In terms of services, you ought to guarantee that a repair service offers systematic malfunction testing, component-level trouble-shooting and diagnostics, and per-component replacements. You possibly can seek advice from review web sites and forums that will give a good idea concerning the credibility of such services. Similarly, case studies and white papers on the website help in knowing working proficiencies of producers.

Accreditations and Criteria

Electronic services are guarded by industry-specific certifications. For example, IPC-7711 / 7721 standard is one such qualification in connection with rework and electronics repair. Such accreditations and standards are a guarantee that the picked repair service specialist have the capabilities necessary to carry out these types of services.

Supply Chain Relationships

You will need to verify that the service vendor employs solid elements or keep powerful supply chain associations to source them from a dependable provider. It is far better to stay away from repair services that are not able to confirm quality replacements.

Pcb-service-provider

If you have a PCB that is not functioning in order, you can find a reliable PCB repair service source by following the aforementioned tips and get it repaired conveniently.

Reviewing ABI’s System 8 PCB Repair Equipment – from Saelig

With ABI’s programmable SYSTEM 8 Range of IC and PCB testers (http://www.saelig.com/category/MFR00134.htm) you can fault-find/troubleshoot and repair any type of analog or digital device or PCB. The tests can be sequenced to less-trained engineers and performed at component level or PCB level. The SYSTEM 8 /BoardMaster Range includes some of the key tools used by the electronics test and repair industry such as: VI Tester, IC Tester (Analog/Digital), Functional Tester (Analog/Digital), Discrete Component Tester, Short Locator, IC Identifier, Universal I/O for PCB and component level test, Oscilloscope ( 3Ch, 350MHz), Frequency Counter (1GHz), Multimeter/DMM, Programmable Power Supply, etc.
Test: digital & analog ICs, BGA packages, PLD’s (CPLD/FPGA), populated PCBs, diodes, resistors, capacitors, transistors, triacs, optos, thyristors, transformers, inductors, etc.

Find: broken tracks, short circuits, dry joints, solder bridges, faulty components, leaky diodes, open circuits, weak nodes, corrosion, etc.

Measure: voltages, resistance, current, power, period, frequency, rise and fall times, pulse width, overshoot, frequency drift, voltage drift, Node Strength, etc.

source

Suggestions for Find PCB Repair Service Provider

pcb-service-provider

Printed circuit boards or PCBs have been popular for long periods. With their pads and conductive traces, they support a selection of electronic parts. At the moment, they are actually a common choice for just about each electronics producer. In case your PCB board is broken, you could seek out aid of a reputable PCB repair service vendor near to you. This informative article walks you through ideas to opt for trusted services in your community.

Things to consider When Choosing PCB Repair Services

When you are seeking a time-tested PCB repair service agency locally, there are a handful of things to be contemplated.

Examine Track Record:

Search engines like google provides results of PCB repair services in a certain area. This enables you to find out the place they are situated and the sets of services made available by them. When it comes to services, it is recommended to guarantee that a repair service provides thorough breakdown testing, component-level trouble shooting and diagnostics, and per-component renewal. It is possible to take a look at review sites and online forums that will give a good idea concerning the reliability of these services. Also, case studies and white papers on the site assist in realizing working proficiencies of producers.

Certificates and Criteria

Electronic services are safeguarded by industry-specific accreditations. Such as, IPC-7711 / 7721 standard is one such qualification relevant to rework and electronics repair. All these accreditations and standards are an assurance that the selected repair service provider have the expertise required to execute these types of services.

Supply Chain Associations

It is essential to see whether the service source uses excellent parts or build and maintain powerful supply chain relationships to source them from a dependable source. It is better to refrain from repair services that are not able to guarantee quality replacements.

Pcb-service-provider

In case you have a PCB that’s not functioning in order, you could find a trusty PCB repair service specialist by using the mentioned steps and get it repaired without difficulty.

Fixing Car Radio. Broken Trace on PCB Soldering. Repairing Electronics

Fixing Car Radio. Broken Trace on PCB Soldering. Repairing Electronics Watch as I show you how to repair a fried radio

source

How to Decide on PCB Repair Service Provider

pcb-service-provider

Printed circuit boards or PCBs have existed for ages. With their pads and conductive traces, they support all kinds of electronic parts. In these days, they have become a well-liked option for every electronics producer. In case your PCB board becomes destroyed, you can easily seek out aid of an outstanding PCB repair service provider inside your town. This informative article walks you through tips to find trustworthy services inside your town.

Things to consider When Picking PCB Repair Services

When you’re seeking a reliable PCB repair service supplier near you, there are some elements to be looked at.

Look at Recognition:

The search engines will bring results of PCB repair services in a specific area. This can help you learn the place they are located and the kinds of services which are available from them. When it comes to services, you should ensure that a repair service brings all-inclusive failure testing, component-level problem solving and diagnostics, and per-component renewal. It’s possible to take a look at review sites and forums that will give a good idea concerning the dependability of such services. And also, case studies and white papers online aid in finding out working proficiencies of makers.

Qualifications and Criteria

Electronic services are safeguarded by industry-specific qualifications. One example is, IPC-7711 / 7721 standard is one such qualification regarding rework and electronics repair. Such certificates and criteria are a warranty that the selected repair service source have the experience essential to run such services.

Supply Chain Collaborations

It is recommended to find out if the service vendor utilizes high-quality parts or keep robust supply chain associations to source them from a proven supplier. It is far better to stay away from repair services which can not guarantee quality replacements.

Pcb-service-provider

If you have a PCB which is not working correctly, you’re able to determine a time-tested PCB repair service provider by following the mentioned steps and get it repaired easily.

ABI Electronics’ PCB Circuit Board Repair Products from Saelig

ABI’s PCB repair products http://www.saelig.com/category/MFR00134.htm – range of value-priced test-gear used by companies around the world for circuit board test and repair, IC counterfeit detection and test.

source

Strategies to Determine PCB Repair Service Agency

pcb-service-provider

Printed circuit boards or PCBs have been established for some time. With their pads and conductive tracks, they support a variety of electronic parts. Nowadays, they have become a common alternative for just about each electronic equipment producer. In the event that your PCB board becomes impaired, you can look for help of a high-quality PCB repair service source in your town. This informative article guides you through rules to settle on tried and tested services within driving distance.

Factors to Consider When Choosing PCB Repair Services

When you’re trying to find a time-tested PCB repair service supplier in your town, there are a couple of elements to be evaluated.

Check Standing:

The major search engines will bring results of PCB repair services in a specific city. This enables you to understand the place they are based and the kinds of services supplied by them. As far as services, it is best to make sure that a repair service brings extensive malfunction testing, component-level problem solving and diagnostics, and per-component replacements. You can actually take a look at review internet websites and forums that will give a good idea regarding the reliability of such services. In addition to that, case studies and white papers on the website help with learning working proficiencies of makers.

Certifications and Criteria

Electronic services are safeguarded by industry-specific certificates. For instance, IPC-7711 / 7721 standard is one such certification related to rework and electronics repair. These accreditations and standards are a guarantee that the selected repair service source have the capabilities needed to do these types of services.

Supply Chain Relationships

You must check if the service vendor applies reliable parts or maintain strong supply chain relationships to source them from a verified supplier. It is far better to get around repair services which can not assure quality replacements.

Pcb-service-provider

For people with a PCB that isn’t working properly, it is easy to determine a trusted PCB repair service supplier through using the mentioned approaches and get it fixed comfortably.

CircuitMedic Professional PCB Repair Kit

The Circuit Medic Professional PCB Repair Kit is the most complete and most versatile printed circuit board repair kit. If you need to repair damaged circuit boards, the all-in-one Professional PCB Repair Kit is what you need.

source

Ideas to Determine PCB Repair Service Agency

pcb-service-provider

Printed circuit boards or PCBs have been established for a long time. With their pads and conductive tracks, they support a range of electronic elements. Today, they have become a common choice for each and every electronic equipment manufacturer. When your PCB board is damaged, you can easily look for assistance of a quality PCB repair service supplier in your town. This piece of writing takes you through how to determine trustworthy services in your state.

The Vital Considerations When Opting For PCB Repair Services

While you are seeking a time-tested PCB repair service provider in your town, there are some factors to be considered.

Have a look at History:

Engines like google provides results of PCB repair services in a particular area. This can help you understand exactly where they are based and the sets of services provided by them. As to services, you need to be sure that a repair service delivers extensive failure testing, component-level trouble-shooting and diagnostics, and per-component replacing. You can actually check with review web sites and online forums that will give a good idea concerning the trustworthiness of these services. And additionally, case studies and white papers over the internet help with knowing working proficiencies of producers.

Accreditations and Standards

Electronic services are guarded by industry-specific qualifications. Such as, IPC-7711 / 7721 standard is one particular certification associated with rework and electronics repair. Such certificates and standards are a warranty that the picked repair service source have the working experience needed to carry out such services.

Supply Chain Relationships

You have to see if the service provider uses dependable elements or build and maintain sound supply chain partnerships to source them from a tried and tested supplier. It is best to get away from repair services that can’t confirm quality replacements.

Pcb-service-provider

When you’ve got a PCB which is not functioning properly, you’re able to settle on a time-tested PCB repair service vendor by following the previously listed tips and get it repaired comfortably.

PCB milling machine – LPKF ProtoMat S100

source

Co-founder of Makerbot, Bre Pettis acquires milling machine firm Other Machine

Former CEO and co-founder of 3D printing firm Makerbot, Bre Pettis has acquired a non 3D printing associated firm – the CNC milling device firm Other Machine.

Californian firm, Other Machine operates from Berkeley and is the designer of the Othermill Pro desktop milling device. Bre Pettis now acts as CEO and founding father of Bre & Co, set up in 2016, the firm creates personalized 3D printed gifts and heirlooms.

Othermill Pro

Other Machine presented its Othermill product line on Kickstarter with the original machine getting more than $311,000 back in 2013. The latest device, the Othermill Pro, right now sells for $3,199.

Making use of its 3-axis toolhead, the machine has the potential to mill Circuit Boards and carve 3D shapes. The principle feature of the product is being able to be incorporated in an office setup. The Othermill Pro is sufficiently little to fit on a worktable, quiet enough to feature in a social workplace and can hasten up production processes by creating in-house in place of outsourcing.

Apart from hardware machines, the Berkeley firm also has created its very own Otherplan software for the CNC machines. Bre Pettis claims he is “thrilled” to purchase Other Machine as,

The Othermill Pro is surely an marvelous milling machine that is so exact that electrical engineers has the ability to mill Circuit Boards with 6 mil traces and create Circuit Boards quicker than a Circuit Board service. I’m psyched to return in the arena assisting innovators.

Circuit Boards and electronics

CEO of Other Machine, Dr. Danielle Applestone describes, “I anticipate building on our commitment of accessible prototyping machines for specialist engineers and empowering a generation of students who benefit from the Othermill Pro to learn and make their concepts a real possibility.”

Applestone in addition mentioned she will carry on in her role as CEO and is “delighted to have Bre’s support.”

Based upon https://www.3dprintingindustry.com/news/co-founder-makerbot-bre-pettis-acquires-milling-machine-company-machine-113976/

DIY T8 CNC machine (PCB, wood plastic)

Very cheap small CNC machine. You can engrav with it PCB’s, wood or soft metal. It’s nice to start with. You can also mill soft wood and plastic but at not so high speed. You can buy it here:
http://www.gearbest.com/3d-printers–3d-printer-kits/pp_356128.html?wid=21&lkid=10239377
and here is an assembly instruction:

source

Co-founder of Makerbot, Bre Pettis buys milling machine company Other Machine

Former CEO and co-founder of 3D printing company Makerbot, Bre Pettis has acquired a non 3D printing associated firm – the CNC milling machine corporation Other Machine.

American corporation, Other Machine operates from Berkeley and is the developer of the Othermill Pro desktop milling machine. Bre Pettis at present serves as CEO and founder of Bre & Co, started in the year 2016, the corporation creates personalized 3D printed gifts and heirlooms.

Othermill Pro

Other Machine presented its Othermill series on Kickstarter with the original machine getting above $311,000 back in 2013. The latest machine, the Othermill Pro, at this time sells for $3,199.

By using its 3-axis toolhead, the machine has the potential to mill Circuit Boards and carve 3D shapes. The primary characteristic of the system is its capability to be incorporated in an office setup. The Othermill Pro is sufficiently little to fit on a desktop, calm enough to feature in a communal workplace and can quicken production processes by creating in-house in lieu of outsourcing.

Together with hardware machines, the Berkeley company has also developed its very own Otherplan software for the CNC machines. Bre Pettis says he is “thrilled” to purchase Other Machine as,

The Othermill Pro is surely an astonishing milling machine that is so exact that electrical engineers can easily mill Circuit Boards with 6 mil traces and develop Circuit Boards quicker than a Circuit Board service. I’m fired up to return in the arena assisting forerunners.

Circuit Boards and electronics

CEO of Other Machine, Dr. Danielle Applestone clarifies, “I look forward to building on our commitment of accessible prototyping machines for expert engineers and empowering a generation of students using the Othermill Pro to learn and make their ideas possible.”

Applestone in addition suggested she will proceed in her position as CEO and is “thrilled to have Bre’s assistance.”

In line with https://www.3dprintingindustry.com/news/co-founder-makerbot-bre-pettis-acquires-milling-machine-company-machine-113976/

Cyclone PCB Factory DIY CNC Router Mill Machine

CNC machine built using parts from 3D printer, salvaged laser printer parts, RAMPS 1.4

source

Co-founder of Makerbot, Bre Pettis acquires milling machine company Other Machine

Ex-CEO and co-founder of 3D printing firm Makerbot, Bre Pettis has acquired a non 3D printing related firm – the CNC milling equipment enterprise Other Machine.

American enterprise, Other Machine operates from Berkeley and is the creator of the Othermill Pro desktop milling equipment. Bre Pettis now serves as CEO and founding father of Bre & Co, established in the year 2016, the enterprise creates customized 3D printed presents and heirlooms.

Othermill Pro

Other Machine launched its Othermill product line on Kickstarter with the original machine raising over $311,000 back in 2013. The most up-to-date equipment, the Othermill Pro, at this point retails for $3,199.

Using its 3-axis toolhead, the machine can mill Printed Circuits and carve 3D shapes. The principle selling feature of the device is its capability to be incorporated in an office setup. The Othermill Pro is small enough to fit on a work desk, silent enough to feature in a social workplace and can help you speed up production processes by creating in-house as an alternative to contracting out.

Together with hardware machinery, the Berkeley company furthermore has designed its unique Otherplan software for the CNC machines. Bre Pettis claims he is “thrilled” to buy Other Machine as,

The Othermill Pro is definitely an incredible milling machine that’s so accurate that electrical engineers can mill Printed Circuits with 6 mil traces and develop Printed Circuits faster than a Printed Circuit service. I’m delighted to return in the arena helping leaders.

Printed Circuits and electronic devices

CEO of Other Machine, Dr. Danielle Applestone explains, “I anticipate building on our commitment of accessible prototyping machines for professional engineers and empowering a number of of students using the Othermill Pro to learn and make their concepts a reality.”

Applestone furthermore claimed she’ll go on in her role as CEO and is “delighted to have Bre’s assistance.”

In line with https://3dprintingindustry.com/news/co-founder-makerbot-bre-pettis-acquires-milling-machine-company-machine-113976/

Top 5 RaspberryPi based projects ▶2

Heart of these projects is RaspberryPi
Kits, Modules and more: http://amzn.to/1Jb62aB

Top 5 RaspberryPi based projects ▶1: https://www.youtube.com/watch?v=plYeHEhhOaY
Top 5 RaspberryPi Robot Projects – https://youtu.be/j_1JFnwOFwI?list=PLygSyNRdCGpGrhF1xhgapYq8XnA3HDAva
Top 5 Things for RaspberryPi – https://youtu.be/SWLJfWMpnkU?list=PLygSyNRdCGpGrhF1xhgapYq8XnA3HDAva
Monday special 🙂

Links:
Ares – easyarts3d.com
pi-topCEED – pi-top.com
Plusberry Pi – plusberrypi.com
FABtotum PRISM – fabtotum.com
Mycroft – mycroft.ai

CLICKABLE TIME – VIDEO INDEX
00:00 – Ares
02:30 – pi-topCEED
04:33 – Plusberry Pi
06:20 – FABtotum PRISM
09:40 – Mycroft

If you have any questions, please, write us:
tech.hd.channel@gmail.com

source

Facebook’s Caffe2 AI tools reach out to iPhone, Android, and Raspberry Pi

Your phone may soon have the ability to realize things in photos with no need of accessing the cloud

New intelligence can be included to cellular phones just like the apple iphone, Android OS gadgets, and low-power personal computers like Raspberry Pi with Facebook’s new open-source Caffe2 deep-learning framework.

Caffe2 enables you to program artificial intelligence features into tablets and smartphones, permitting them to identify photos, movie, textual content, and speech and be more situationally aware.

It is critical to understand that Caffe2 isn’t an Artificial intelligence program, but a tool permitting AI to be programmed into smart phones. It does take just a few lines of code to write learning models, which can then be included into apps.

The launch of Caffe2 is critical. It implies users will be in the position to get image identification, natural language processing, and computer vision straight on their phone. That job is usually offloaded to remote servers in the cloud, with smart phones then connecting to it.

Mobile products are receiving more artificial intelligence functions. More cellphones are being bundled up with Amazon’s Alexa and Google Assistant, while Apple’s Siri has been a staple in the iPhone for a long time. Samsung’s Galaxy S8 smart phones are due to get the Bixby voice assistant, which will make using the mobile phones incredibly easier.

Caffe2 can function within the power constraints of mobile products. It works with mobile hardware to increase the speed of AI apps and create neural networks.

Caffe2 uses the computing power of new mobile hardware to accelerate deep-learning jobs. By way of example, in smart phones, Caffe2 will harness the computing power of Adreno GPUs and Hexagon DSPs on Qualcomm’s Snapdragon mobile chipsets.

Find more at http://pcworld.com/article/3190759/artificial-intelligence/facebooks-caffe2-ai-tools-come-to-iphone-android-and-raspberry-pi.html